Digital Temperature Controller Dual Probe Thermostat
Pymeter Digital Temperature Controller Dual Probe Reptile Thermostat Controlled Outlet for Heat Lamps
Pymeter Digital Temperature Controller is an easy to use, safe and reliable dual outlets thermostat. It will automatically control temperature in your hedgehog’s habitat based on the temperature you set, for up to two lamps.
Advantage compare to other Thermostat:
Dual Probes, able to control 2 heat lamps independently.
Easy and Flexible - keep desired temperature range by setting On-Off setpoint.
Each socket supports Heating and Cooling mode, intelligently identify via On-Off set point.
Temperature Difference Alarm - helpful to keep target safe from malfunction of any one probe.
Power-On Delay - protect output device from excessive On-Off toggling.
Power-Off Memory - settings are retained even when power off.
Temperature Range: -50~99°C/ -58~210°F; Temperature Resolution: 0.1°C/ 0.1°F
Controller Dimension: 8.26x2.16x1.57 inch; Temperature Accuracy: ±1°C/ ±1°F
Input: 85~250VAC, 50/60Hz; Output: 85~250VAC, MAX 10A
Buzzer Alarm: High/Low Temperature, Differential Temperature, Sensor Fault
Input Power Cord: 4.5ft; Sensor Cable: Waterproof Sensor x2; 2m/ 6.56ft.
10A 1200W
Pymeter Digital Temperature Controller Dual Probe Reptile Thermostat Controlled Outlet for Heat Lamps
Pymeter Digital Temperature Controller is an easy to use, safe and reliable dual outlets thermostat. It will automatically control temperature in your hedgehog’s habitat based on the temperature you set, for up to two lamps.
Advantage compare to other Thermostat:
Dual Probes, able to control 2 heat lamps independently.
Easy and Flexible - keep desired temperature range by setting On-Off setpoint.
Each socket supports Heating and Cooling mode, intelligently identify via On-Off set point.
Temperature Difference Alarm - helpful to keep target safe from malfunction of any one probe.
Power-On Delay - protect output device from excessive On-Off toggling.
Power-Off Memory - settings are retained even when power off.
Temperature Range: -50~99°C/ -58~210°F; Temperature Resolution: 0.1°C/ 0.1°F
Controller Dimension: 8.26x2.16x1.57 inch; Temperature Accuracy: ±1°C/ ±1°F
Input: 85~250VAC, 50/60Hz; Output: 85~250VAC, MAX 10A
Buzzer Alarm: High/Low Temperature, Differential Temperature, Sensor Fault
Input Power Cord: 4.5ft; Sensor Cable: Waterproof Sensor x2; 2m/ 6.56ft.
10A 1200W
Pymeter Digital Temperature Controller Dual Probe Reptile Thermostat Controlled Outlet for Heat Lamps
Pymeter Digital Temperature Controller is an easy to use, safe and reliable dual outlets thermostat. It will automatically control temperature in your hedgehog’s habitat based on the temperature you set, for up to two lamps.
Advantage compare to other Thermostat:
Dual Probes, able to control 2 heat lamps independently.
Easy and Flexible - keep desired temperature range by setting On-Off setpoint.
Each socket supports Heating and Cooling mode, intelligently identify via On-Off set point.
Temperature Difference Alarm - helpful to keep target safe from malfunction of any one probe.
Power-On Delay - protect output device from excessive On-Off toggling.
Power-Off Memory - settings are retained even when power off.
Temperature Range: -50~99°C/ -58~210°F; Temperature Resolution: 0.1°C/ 0.1°F
Controller Dimension: 8.26x2.16x1.57 inch; Temperature Accuracy: ±1°C/ ±1°F
Input: 85~250VAC, 50/60Hz; Output: 85~250VAC, MAX 10A
Buzzer Alarm: High/Low Temperature, Differential Temperature, Sensor Fault
Input Power Cord: 4.5ft; Sensor Cable: Waterproof Sensor x2; 2m/ 6.56ft.
10A 1200W
